 |
|
|||||||||||||||||||||||||||||
| [发表评论] [本类其他产品] [本类其他供应商] [收藏] | ||||||||||||||||||||||||||||||
| 销售商： 米力光国际贸易有限公司 | 查看该公司所有产品 >> |
Euclid lab coaters 欧几里德实验室涂布机 Euclid Coating Systems, Inc.
|
SINGLE ROLL LAB COATER |
 |
| Single Roll Lab Coater, Manual Unit: Model#E-BC12M1 Single Roll Lab Coater, 110 Volt Power Unit: Model#E-BC12P1 Single Roll Lab Coater, 220 Volt Power Unit: Model#E-BC12P1 |
Optional: Precision Air Regulator and Air Gauge for extreme accuracy and precise control of pneumatic wiper blade for controlling final coating weight.
-
Excellent for doing drawdowns and performing tests onto small samples and hand sheets.
-
Applies a uniform, consistent, and repeatable coating laydown every time.
-
Primarily used for applying thin coatings onto papers and films.
-
Applies coatings from as low as 1/10 of 1 micron (.000004”) to as high as 5 mils (.005”).
-
Coat weight is controlled by varying the air pressure of the patented pneumatic wiper blade which presses against the back of the rubber roll (requires compressed air of at least 60 p.s.i. supplied by customer).
-
Features a 6” diameter x 12” wide standard neoprene rubber roll, and mounts between aluminum side frames.
-
Different types of rubber coverings for the roll including E.P.D.M., Silicone, Viton, Hypalon, Buna-N, Urethane, Polysulfide, and Natural Rubber are also available (prices vary).
-
Manual unit contains a handle for rotating the roll.
-
Power unit contains a variable speed motor and controller for rotating the roll, available in 110 or 220 Volts.
