|
||||||||||||||||||||||||||||||
[发表评论] [本类其他产品] [本类其他供应商] [收藏] |
![]() |
销售商: 北京昭天伟业科技有限公司 | 查看该公司所有产品 >> |
Microgrinder : EG-402
Includes of a microscope for observation of pipette contact at grinding plane
The microscope is mounted on this grinder, which uses a special motor to minimize irregular movements of the grinding plane: confirmation of contact between the pipette and the grinding plane enables grinding to be performed with greater precision. In addition, this model provides stable performance at all revolution speeds - from low for more precision to high for faster grinding. An easily operable coarse and fine movement coaxial manipulator is equipped for vertical operation of the micropipette, which also enables very precise grinding. A protractor is mounted on the pipette holder fixing section, making it easy to set the required grinding angle, and an adaptor is attached for vertical grinding. New water filling and drainage mechanisms are installed to prevent clogging or the accumulation of shavings, making the apparatus as a whole much easier to use.
Specification
Accessories included:
Adaptor for Vertical Grinding ;Diamond Wheel Cleaner ;Dedicated Pipette Holder ;Hex Wrench;Power Cord
Movement range:
Up-and-Down Manipulator: Approx. 47mm;
Microscope: X approx. 7mm, Y30mm, Z approx. 8mm
Magnifications:
30× (Eyepiece 10×, Objective Lens 3×)
Glass capillary:
ø1mm ~ ø1.5mm;
Working voltage:
AC100V ~ AC240V, 50/60Hz;
Power consumption:
10W;
Motor speed:
Approx. 150rpm ~ 2,000rpm
(The diamond wheel may be stopped under 150rpm.)
Dimensions/Weight:
W250 × D450 × H400mm, 6.6kg