|
概括：适合工业机器视觉.图像检测系统,医学影像检测系统的应用范围规格型号:
规格： XC-7500/XC-8500CE
Pick up device: Interline transfer Hyper HAD CCD
Optical size: 1/2-inch format (6.4 x 4.8mm)
Picture elements: 659(H) × 494(V) 782(H) × 582(V)
Video output elements: 646(H) × 485(V) 767(H) × 575(V)
Cell size: 9.9(H) x 9.9(V)μm 8.3(H) x 8.3(V)μm
Signal systems: EIA/VGA CCIR/SVGA
Lens mount: C-mount
Flange back: 17.526mm
Horizontal frequency: 15.734kHz 5.625kHz
Vertical frequency: 59.94Hz 50Hz
Sync system: Internal/External (auto)
External sync system: HD/VD (4.0Vp-p). VS or SYNC (0.3Vp-p) Frequency deviation±1%
Video out: 1.0Vp-p sync negative 75 Ω
Output modes: 2 I:Interlace (1/60sec.) 2 I:Interlace (1/50sec.)
2N:Non Interlace (1/60sec.) 2N:Non Interlace (1/50sec.)
1N:Non Interlace (1/30sec.) 1N:Non Interlace (1/25sec.)
Horizontal resolution: 500TV lines 580TV lines
Vertical resolution: 485TV lines 575TV lines
S/N ratio: 60dB (200kHz to 4.2MHz) 58dB (200kHz to 5.0MHz)
Sensitivity: 400lx F4
Minimum sensitivity: 3lx F1.4 AGC:ON (with IR cut filter)
Power requirements/consumption: DC+10.5 to 15V/2.5W
Normal Shutter (Frame): off. 1/125.1/250.1/500.1/1,000.1/2,000.1/4,000.1/10,000sec., Flickerless
E-DONPISHA: 1/1,000. 1/2,000. 1/4,000. 1/6,000. 1/8,000. 1/10,000sec., 1/11,000sec. (XC-7500 only)
Normal-speed (Frame): Another speed can be selected by internal SW.
High-speed (Frame): 1/10,000 to 1/100,000sec.
Low-speed (Frame): ∞ to approx.1/60sec. ∞ to approx.1/50sec.
External control (Frame): ∞ to 1/60~1/10,000sec. ∞ to 1/50~1/10,000sec.
External trigger: Polarity+/-, trigger width (2μ to 10m sec.), input impedance 10kΩ
Gamma: ON (γ =0.45) / OFF (γ =1) (Internal switch selection)
Gain: AGC(0 to 18dB). FIX (0dB). Manual (0 to 18dB factory setting:fixed same level)
Dimensions/Weight: 44 × 44 × 70mm/190g
Temperture on performance: v0 to 40°C
Operating temp./mois.: -5 to 45°C/25 to 80%
Storage temp./mois.: -25 to 60°C/20 to 90%
Vibration resistance: 7G (11 to 200Hz) 3directions
Shock resistans: 70G
MTBF/Regulations: 83,400 hrs / UL FCC CE marking
|
